UCI Rules - 2002:
Non-standard wheels in conformity with article 1.3.018:
Article 1.3.018 relates only to group races (in packs).
In this type of event, the riders generally use standard (conventional) wheels which are clearly defined in article 1.3.018. These wheels are authorised de facto.
However, during races in packs, certain riders do use non-standard wheels (rims higher than 2.5 cm, fewer than 16 spokes, spoke thicknesses of over 2.4 mm). If any of these conditions is noted, the wheel is deemed to be a non-standard wheel and must have passed a break test in order for it to be authorised for use in competition.
The manufacturers inform the UCI of the names of wheels which have been successfully tested. The names of these wheels are shown in the list below. The wheels can therefore be clearly identified. If this is not the case then the wheel is not authorised for use.
Ada wheel - V profile (50mm)
Clincher Pro front wheel (16 spokes)
Ambrosio Onda (rim Focus or FCS 28)
Ambrosio X Carbo
XL Levitation « 16, 24 spokes »
XL Elevation « 16, 24 spokes »
ZONDA « 18 spokes » (production stopped in 1999)
ATLANTA 96 « 28, 32, 36 spokes »(production stopped in 1999)
Aéro tubular 18 spokes and 24 spokes
Aéro Clincher 18 spokes and 24 spokes
Penta Aero 20
Light Weight Carbon Fiber
Galaxium - rim alu - ailandtes carbones sur spokes
RA Antara « 28 spokes »
RA Antara « 18 spokes »
Speed Lite « 18,24 and 28 spokes »
Gipiemme Grecal 28"
Gipiemme Tecno Star 28"
Gipiemme Tecno 024 Race 28"
Gipiemme Fulcrum 28"
ALPS 700C (18 spokes / spokes)
X KEYMAND KWS-C1
Tandragon(16 spokes )
Zephir (16 spokes)
Cosmic Carbone SSC
Cosmic Elite 2 (rim CXP 30)
Ksyrium SSC SL
Nippon Mitsubishi Oil Corporation:
Nisseki carbon wheel AM27 (18 spokes)
Stratus DV (16 spokes)
Stratus DV - UL (Carbon) (16 spokes)
WCS/Pro DS 27 (16 spokes)
DT Bladed Aero Spokes (20 spokes)
Comp DS (20 spokes)
VELOMAX Circuit *
Rolf Prima Vigor - aluminum clincher front wheels (14 spokes)
WH - 7700 & WH-7701 Normal
WH - 7700 & WH-7701 carbon tubular
WH - 7700 & WH-7701 alloy tubular
WH - R535
WH - R540
WH - 6500
Spinergy SRX (2B02) « 20-28 spokes »
Spinergy SR3 (2S02) « 20-28 spokes »
Spinergy X AERO (PRI-FC-111) « 16-20 spokes »
Spinergy X AERO LITE (2L02) « 18-20 spokes »
Spinergy X AERO CARBON « 16-20 spokes »
Sunny Crown Enterprise:
Sunny Crown Enterprise CKT Carbone 16 and 18 spokes
Thorius - model SHADO Carbon - clincher (16/20 spokes) *
Thorius - model SHADO Carbon - tubular (16/20 spokes) *
Thorius - model N'ERA (24 spokes) *
Bontrager X-Lite Tubular
Bontrager X-Lite Clincher
Bontrager Race Lite Tubular
Bontrager Race Lite Clincher
Bontrager Race X Lite Carbon
Bontrager Race X Lite Aero
Bontrager Aero Tubular
Rolf Vector Comp
Rolf Vector Pro
ZIPP Speed Weaponry:
ZIPP 303 (Z3) Tubular 700 c (rim ZIPP 280)
ZIPP 303 Tubular 650 c (rim ZIPP 245)
ZIPP 404 (Z4) Tubular 700 c (rim ZIPP 360)
ZIPP 404 Tubular 650 c (rim ZIPP 330)
ZIPP 404 Clincher 700 c (rim ZIPP 505)
ZIPP 404 Clincher 650 c (rim ZIPP 460)
ZIPP 303 Clincher 700 c (rim ZIPP 415)
ZIPP 303 Clincher 650 c (rim ZIPP 370)
VELOMAX TEMPEST II *
Wheels of the bicycle may vary in diameter between 70 cm maximum and 55 cm minimum, including the tyre. For the cyclo-cross bicycle the width of the tyre shall not exceed 35 mm and it may not incorporate any form of spike or stud.
For massed start road races only wheel designs granted prior approval by the UCI may be used. Wheels will have minimum 12 spokes; spokes can be round, flattened or oval, as far as no dimension of their sections exceeds 10 mm. In order to be granted approval wheels must have passed a rupture test as prescribed by the UCI in a laboratory approved by the UCI. The test results must show that the rupture characteristics obtained are compatible with those resulting from an impact sustained during normal use of the wheel. The following criteria must be fulfilled:
On impact, no element of the wheel may become detached and be expelled outwards.
The rupture must not present any shattered or broken off elements, or any sharp or serrated surfaces that could harm the user, other riders and/or spectators.
The rupture characteristics must not cause the hub to become separated from the rim in such a way that the wheel becomes detached from the forks.
Without prejudice to the tests imposed by the laws, regulations or customs, standard (traditional) wheels are exempted from the rupture test referred to above. A traditional wheel is deemed to be a wheel with at least 16 metal spokes; the spokes may be round, flat or oval, provided that no dimension of their cross sections exceeds 2.4 mm; the section of the rim must not exceed 2.5 cm on each side.
Notwithstanding this article, the choice and use of wheels remains subject to articles 1.3.001 to 1.3.003.